Power Supplies
Dedolight manufactures several power supplies to meet the needs of our worldwide customers. All power supplies utilize the latest in electronic technology for utmost reliability and versatility.
Several power supplies in various configurations are available for our low voltage Classic Series lighting fixtures and may be found under “Tungsten Power Supplies”.
Dedolight daylight electronic ballasts incorporate several safety features such as over voltage, overload, overheat and short circuit protection. All have active power factor correction circuitry and automatic input voltage adjustment from 90-260 VAC. Daylight electronic ballasts may be found under ”Daylight Power Supplies”.
Tungsten Power Supplies
DT12-4 - Power Supply 4 x 12 V / 100 W
The DT12–4 Power Supply / Control Unit can simultaneously power four classic Dedolight heads equipped with 20 W, 50 W, 100 W or mixed wattage lamps.
Its AC power input can be set for every AC power in the world from 100–255 VAC in 24 steps.
Each light output can be individually and independently switched in four distinct steps, each increasing color temperature and output:
1. Off
2. Low 3000 K
3. Medium 3200 K (10.7 V at lamp)
4. High 3400 K (12.2 V at lamp)
The DT12–4 also incorporates an input voltage indicator allowing the user to determine the correct input voltage setting at a glance and to precisely control the color temperature.
Technical Data: DT12–4
Weight: 5.5 kg (12.1 lb.)
Input voltage: 100–255 VAC (switchable)
Output: 4x10–12 VAC, max. 100 W
Controls:
Illuminated master power switch Fused input and outputs.
Switchable input and outputs
DT24-3 - Power Supply 3 x 24 V / 150 W
The DT24–3 Power Supply/Control unit can simultaneously power three classic Dedolight heads equipped with 150 W lamps at a nominal voltage of 24 VAC.
Its AC power input can be set for every AC power in the world from 100–255 V in 24 steps.
Each light output can be individually and independently switched in four distinct steps, each increasing color temperature and output.
1. Off
2. Low 3000 K
3. Medium 3200 K (22 V at lamp)
4. High 3400 K (24 V at lamp)
The DT24–3 also incorporates an input voltage indicator allowing the user to determine the correct input voltage setting at a glance and to precisely control the color temperature.
Technical Data: DT24–3
Weight: 5.15 kg (11.4 lb.)
Input voltage: 100–255 VAC (switchable)
Output: 3x17.4–24.5 VAC, max. 150 W
Controls:
Illuminated master power switch Fused input and outputs.
Switchable input and outputs
DT36-1 - Power Supply 1 x 36V / 400 W
The DT36–1 Power Supply / Control Unit powers one Dedolight DLH436 light head.
With the aid of the built in voltage indicator, the input voltage may be set from 100 - 255 V AC (in 5 steps) to precisely match the local prevailing AC power.
Three calibrated color temperatures may also be selected.
DT4x150 - Power Supply 4 x 24 V / 150 W
The DLH4x150S is powered from the DT4x150 control unit* which allows individual dimming of each lamp. Any desired color temperature below 3400 K can be chosen.
Four different intensity levels can be set for each color temperature by activating one, two, three or four of the lamps.
An infinite variation of intensity and warm tone effects can be achieved.
* Available in four different input voltages (four versions):
240 V (DT4x150E+)
230 V (DT4x150E)
120 V (DT4x150U)
100 V (DT4x150J)
Technical Data DT4x150:
Weight: 2.2 kg (4.9 lb.)
Output voltage: 4x24 V AC
Controls:
Each output is individually dimmable
DIMTA3 - Power Supply 1 x 12 V / 100 W
In line dimmable electronic power supply.
12 V lamps can be used up to 100 W.
Maximum color temperature is 3200° K.
Maximum light output is equivalent to medium position on the DT12-4 power supply.
Technical Data: DIMTA3
Weight: 498 g (1.1 lb.)
Input voltage: 230 VAC
Output: 0V-11 VAC/100 W max.
DT24-1 - Power Supply 1 x 24 V / 150 W
After several years of development work, we are proud to introduce this new in-line dimmable electronic power supply.
The DT24-1 power supply provides 24V at 150 W which results in 80 % more light output in comparision to the 12 V/100 W power supply.
Technical Data: DT24-1
Input: Three versions for worldwide use
DT24-1E (230/240 VAC input)
DT24-1U (120 VAC input)
DT24-1J (100 VAC input)
Output: 0V-24 V/150 W max.
Controls:
Variable function switch for:
3400 K (maximum output)
3200 K
Continuous dimming from maximum to minimum
Weight: 710 g (1.5 lb.)
DT12DC - Power Supply 1 x 12 V / 100 W
The DT12DC allows powering the DLOBA² on–board tungsten light head from mains.
Also for powering a DLH4 light head in conjunction with the Adapter423, a 4-pin to 3-pin adapter.
Technical Data: DT12DC
Weight: 970 g (2.1 lb.)
Size: 196 mm x 88 mm x 51 mm (7.7” x 3.4” x 2”)
Input: 90–260 VAC
Output: 12 VDC 130 W
Safety: Over voltage and overload protection
DLSPLIT - Splitter Box
Dedolight splitter box to power up to four classic 12 V Dedolights.
Use four 50 W or two 100 W lights.
May be powered from 14.4 V output of BIGPACK 1 or 2.
Each output is individually and continuously dimmable.
Technical Data: DLSPLIT
Input voltage: 12–20 VDC
Output: each regulated to 12 V max. total 200 W
DImension: 22 cm x 6 cm x 8.5 cm (8.7” x 2.4” x 3.3”)
Weight: 836 g (1.8 lb.)
BIGPACK - Battery Pack
The BIGPACK will power up to four classic 12 V Dedolights in conjunction with the Dedolight splitter box (DLSPLIT) and may also be used to power the Series 200 lights.
Includes internal overnight charger.
Technical Data: BIGPACK1
Battery: NiMH battery pack
Two separate outputs: 14.4 V (26 Ah) & 28.8 V (13 Ah)
Input voltage : 84–240 V/50–60 Hz
Dimension: 13.5 cm x 27.5 cm x 18 cm (5.3” x 10.8” x 7.1”)
Weight: 8 kg (17.6 lb.)
Technical Data: BIGPACK2
Battery: NiCd battery pack
Two separate outputs: 14.4 V (16 Ah) & 28.8 V (8 Ah)
Input voltage: 84–240 V/50–60 Hz
Dimension: 13.5 cm x 27.5 cm x 18 cm (5.3” x 10.8” x 7.1”)
Weight: 8 kg (17.6 lb.)
DLBAT - Battery Belt (12 V)
Our battery belts are built from extremely durable textile materials and feature two different types of cells.
NiCd (nickel cadmium) cells with high reliability, long lifetime, and good performance in cold weather conditions. Lower capacity than NiMH cells of the same size.
NiMH (nickel metal hydride) cells with higher capacity. Longer run time for comparable size.
Our battery belts are available in different capacities and in 12 different versions. All have built–in (5 - 7 hour) chargers that work with inputs from 84–240 V at 50–60 cycle for world wide use.
Options:
Incorporated electronic discharge guard (add suffix \"E\")
With electronic discharge guard and built-in dimmer (add suffix \"ED\")
DLBAT54–NiCd cell 12 V / 5A h battery belt with 4–pin XLR connector
Weight: 2.0 kg (4.4 lbs)
DLBAT84–1–NiCd cell 12V / 8 Ah battery belt with 4-pin XLR connector
Weight: 3.0 kg (6.6 lbs)
DLBAT84–2–NiMH cell Same size and weight as DLBAT54 NiCad but with higher capacity
Weight: 2.0 kg (4.4 lbs)
DLBAT84–13–NiMH cell Same size and weight as DLBAT84 NiCad but with higher capacity
Weight: 3000 g (6.6 lbs)
Use the DXBAT4–3 cable to connect battery belts to Dedolight DLH4 light head. Use the DLOBA²–XLR cable to connect battery belts to DLOBA² on–board light head. When using the DLOBA² on-board light, set the battery belt dimmer to maximum for full light head control and to prevent possible damage to the electronics.
DCAR3 - Cigarette Lighter Adapter
For powering a Dedolight DLH4 light head with 12 V lamp from automobile cigarette lighter.
The DCAR3 adapter consists of a cable with cigarette lighter plug, micro fuse, in–line on/off switch and mating connector.
Length: 2.5 m (8.2')
DXBAT4-3 - Battery Cable
Connects DLH4 light head to any 12 V battery with 4-pin XLR connector.
Length: 1.2 m (3.9')
DEXTCHG - External Charger
Optional external four hour charger
Dimension: 189 x 132 x 82 mm (7.4 x 5.2 x 3.2”)
Weight: 650 g (1.4 lb.)
DLSWI300 - 12 V DC Inverter
Inverter to power a DEB200D from a car battery or other 12 V DC source
Dimension: 20.5 x 12.5 x 10 cm (8.1 x 4.9 x 3.9”)
Weight: 3.6 kg (7.9 lb.)
DLSWI1000 - Inverter
Allows powering the DEB 400D electronic ballast from a car battery or other 12 V DC source
Weight: 6.5 kg (14.3 lb.)
Size: 35 x 20.5 x 11 cm (13.8 x 8.1 x 4.3”)
Daylight Power Supplies
DEB200D - Flicker Free Ballast
Utilizing the latest technology, the DEB200D electronic flicker free ballasts are designed to power the Dedolight 200D and the 200S daylight / tungsten light heads.
Light weight yet rugged, small yet powerful with every conceivable feature you would want.
Four different versions allow powering the light from mains or from battery.
Dimmable from 200 W to 100 W
Over-voltage, overload, overheat and short circuit protection. Rainproof according to IP 23 when in horizontal position.
Technical Data: DEB200
Powered from mains.
Dimension: 23.8 x 12.8 x 7.2 cm (9.4 x 5 x 2.8”)
Weight: 1.900 g (4.2 lb)
Input Voltage: Automatic sensing 90 – 260 VAC
DEB200BAT - Flicker Free Ballast
Utilizing the latest technology, the DEB200D electronic flicker free ballasts are designed to power the Dedolight DLH200D and DLH200S daylight/tungsten light heads.
Light weight yet rugged, small yet powerful with every conceivable feature you would want.
Four different versions allow powering the light from mains or from battery.
Dimmable from 200 W to 100 W
Over-voltage, overload, overheat and short circuit protection.
Rainproof according to IP 23 when in horizontal position.
Battery operated electronic ballast for use with external batteries (BIGPACK1 and BIGPACK2)
Technical Data: DEB200BAT
Powered from external batteries (BIGPACK1 and BIGPACK2)
Dimension: 23.8 x 12.8 x 7.2 cm (9.4 x 5 x 2.8")
Weight: 2.000 g (4.4 lb)
Input: 19-36 VDC
DEB200BATAB - Flicker Free Ballast
Utilizing the latest technology, the DEB200D electronic flicker free ballasts are designed to power the Dedolight DLH200D and DLH200S daylight/tungsten light heads.
Light weight yet rugged, small yet powerful with every conceivable feature you would want.
Four different versions allow powering the light from mains or from battery.
Dimmable from 200 W to 100 W
Over-voltage, overload, overheat and short circuit protection.
Rainproof according to IP 23 when in horizontal position.
Battery operated electronic ballast for use with external batteries (BIGPACK1 and BIGPACK2).
Fitted with two gold mount plates to simultaneously accept two Anton Bauer batteries
Technical Data: DEB200BATAB
Powered from external batteries (BIGPACK1 and BIGPACK2) or two AntonBauer batteries (minimum 2x Hytron 100)
Dimension: 23.8 x 12.8 x 9.2 cm (9.4 x 5 x 3.6”)
Weight: 2.200 g (4.8 lb)
Input: 19–36 VDC
DEB200BATPAG - Flicker Free Ballast
Utilizing the latest technology, the DEB200D electronic flicker free ballasts are designed to power the Dedolight DLH200D and DLH200S daylight/tungsten light heads.
Light weight yet rugged, small yet powerful with every conceivable feature you would want.
Four different versions allow powering the light from mains or from battery.
Dimmable from 200 W to 100 W
Over-voltage, overload, overheat and short circuit protection.
Rainproof according to IP 23 when in horizontal position.
Battery operated electronic ballast for use with external batteries (BIGPACK1 and BIGPACK2). Fitted with two mounting plates to simultaneously accept two PAG batteries
Technical Data: DEB200BATPAG
Powered from external batteries (BIGPACK1 and BIGPACK2) or two PAG batteries
Dimension: 23.8 x 12.8 x 9.2 cm (9.4 x 5 x 3.6”)
Weight: 2.200 g (4.8 lb)
Input: 19–36 VDC
DEB400D - Flicker Free Ballast
Utilizing the latest technology, the DEB400D electronic flicker free ballast was designed to power the Dedolight 400D, the DedoPAR and the Dedolight 400S.
Light weight yet rugged, small yet powerful with every conceivable feature you would want.
Dimmable (40%)
Boost position for added light output (575 W)
Active power factor correction
Auto start mode on request
Over voltage, overload, overheat and short circuit protection
Automatic input voltage adjustment from 90–260 VAC
Technical Data: DEB400D
Weight: 3400 g (7.5 lb.)
Wattage: 400 W / 575 W
Input voltage: Automatic sensing 90–260 VAC
Mounting: May be attached to light stand using DEB400H mounting bracket (not included)
Safety: Over voltage, overload, overheat and short circuit protection
Indicators: Three LED status indicators (ready, lamp, heat)
Dimming range: 40 %
DEXTCHG - External Charger
Optional external four hour charger
Dimension: 189 x 132 x 82 mm (7.4 x 5.2 x 3.2”)
Weight: 650 g (1.4 lb.)
DLSWI300 - 12 V DC Inverter
Inverter to power a DEB200D from a car battery or other 12 V DC source
Dimension: 20.5 x 12.5 x 10 cm (8.1 x 4.9 x 3.9”)
Weight: 3.6 kg (7.9 lb.)
DLSWI1000 - Inverter
Allows powering the DEB 400D electronic ballast from a car battery or other 12 V DC source
Weight: 6.5 kg (14.3 lb.)
Size: 35 x 20.5 x 11 cm (13.8 x 8.1 x 4.3”)
